Concept Guide

MIB Object OID Object Values Description
• If copySrcFileType is a binary
le, you must also specify
copySrcFileLocation and
copySrcFileName.
copySrcFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.3
1 = ash
2 = slot0
3 = tftp
4 = ftp
5 = scp
6 = usbash
Species the location of source
le.
• If copySrcFileLocation is FTP
or SCP, you must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copySrcFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 Path (if the le is not in the
current directory) and lename.
Species name of the le.
• If copySourceFileType is set
to running-cong or startup-
cong, copySrcFileName is
not required.
copyDestFileType .1.3.6.1.4.1.6027.3.5.1.1.1.1.5
1 = Dell EMC Networking OS le
2 = running-cong
3 = startup-cong
Species the type of le to copy
to.
• If copySourceFileType is
running-cong or startup-
cong, the default
copyDestFileLocation is
ash.
• If copyDestFileType is a
binary, you must specify
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = ash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Species the location of
destination le.
• If copyDestFileLocation is
FTP or SCP, you must
specify copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the le is not in the
default directory) and lename.
Species the name of
destination le.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
• If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP, or
SCP server.
• If you specify
copyUserName, you must
Simple Network Management Protocol (SNMP) 947