Concept Guide

MIB Support for LLDP Notication Interval
Dell EMC Networking provides objects for controlling the transmission of LLDP notication messages. The following table lists the related
MIB objects:
Table 122. MIB Objects for LLDP Notication Interval
MIB Object OID Description
lldpNoticationInterval 1.0.8802.1.1.2.1.1.5 This object controls the transmission of
LLDP notications.
SNMP Walk Output
snmpwalk -c public -v 2c 10.16.132.55 1.0.8802.1.1.2.1.1.5
.1.0.8802.1.1.2.1.1.5.0 = INTEGER: 5 seconds
snmpset -c public -v 2c 10.16.132.55 1.0.8802.1.1.2.1.1.5.0 i 20
.1.0.8802.1.1.2.1.1.5.0 = INTEGER: 20 seconds
MIB support for Port Security
Dell EMC Networking OS provides MIB objects to enable or disable port security feature on the physical and port channel interfaces.
The port security DELL-NETWORKING-PORT-SECURITY-MIB object contains both the global and interface level MIB objects.
Global MIB objects for port security
This section describes about the scalar MIB objects of the global MIB dellNetPortSecGlobalObjects.
The following table shows the scalar global MIB objects for port security.
Table 123. Global MIB Objects for Port Security
MIB Object OID Access or Permission Description
dellNetGlobalPortSecurityMode 1.3.6.1.4.1.6027.3.31.1.1.1 read-write Enables or disables port security feature
globally on the device.
dellNetGlobalTotalSecureAddress 1.3.6.1.4.1.6027.3.31.1.1.2 read-only Displays the total number of MAC
addresses learnt or congured in the
device.
dellNetGlobalClearSecureMacAd
dresses
1.3.6.1.4.1.6027.3.31.1.1.3 read-write Deletes all the secured MAC addresses in
the system based on the specic type
(sticky or dynamic).
dellNetGlobalResetViolationStatu
s
1.3.6.1.4.1.6027.3.31.1.1.4 read-write Resets the violation status (Err-disabled
state) of all violated interfaces based on
the specied type (MAC limit or station
move violation).
964 Simple Network Management Protocol (SNMP)