Concept Guide

MIB support for interface level port security
The MIB table dellNetPortSecIfConfigTable is used to achieve port security feature (MAC address learning limit) on an interface.
NOTE:
Port Security is not supported in VLT port channels.
The following table shows the MIB objects of the table dellNetPortSecIfConfigTable. The OID of the MIB table is
1.3.6.1.4.1.6027.3.31.1.2.1.
Table 124. Interface level MIB Objects for Port Security
MIB Object OID Access or Permission Description
dellNetPortSecIfPortSecurityEna
ble
1.3.6.1.4.1.6027.3.31.1.2.1.1.1 read-only Species if the port security feature is
enabled or disabled on an interface.
dellNetPortSecIfPortSecuritySta
tus
1.3.6.1.4.1.6027.3.31.1.2.1.1.2 read-only Represents the port security status of
an interface.
dellNetPortSecIfSecureMacLimit 1.3.6.1.4.1.6027.3.31.1.2.1.1.3 read-write Maximum number (N) of MAC
addresses to be secured on the
interface
dellNetPortSecIfCurrentMacCou
nt
1.3.6.1.4.1.6027.3.31.1.2.1.1.4 read-only Current number of MAC addresses
learnt or congured on this interface
dellNetPortSecIfStationMoveEn
able
1.3.6.1.4.1.6027.3.31.1.2.1.1.5 read-write Enable or disable station movement on
the dynamically secured MAC addresses
learnt on the interface.
dellNetPortSecIfSecureMacViola
tionAction
1.3.6.1.4.1.6027.3.31.1.2.1.1.6 read-write Determines the action to be taken when
MAC limit violation occurs in the system.
dellNetPortSecIfStmvViolationA
ction
1.3.6.1.4.1.6027.3.31.1.2.1.1.7 read-write Determines the action to be taken when
either dynamic or static MAC limit
violation occurs in the system.
dellNetPortSecIfStickyEnable 1.3.6.1.4.1.6027.3.31.1.2.1.1.8 read-write Enables or disables sticky port security
feature on this interface.
dellNetPortSecIfClearSecureMa
cAddresses
1.3.6.1.4.1.6027.3.31.1.2.1.1.9 read-write Deletes secure MAC addresses based on
the specied type.
dellNetPortSecIfResetViolationS
tatus
1.3.6.1.4.1.6027.3.31.1.2.1.1.10 read-write Resets the violation status of an
interface based on the specied type.
dellNetPortSecIfSecureMacAge
Enable
1.3.6.1.4.1.6027.3.31.1.2.1.1.11 read-write Enables aging of the dynamically
secured MAC addresses learnt on the
interface.
Enabling and viewing SNMP for port security
To enable or view DELL-NETWORKING-PORT-SECURITY-MIB, congure snmp-server in read-write mode using the snmp-server
community public rw command. You can enable the port security feature on the Dell EMC Networking OS using the snmpset
command. Also, you can view if the port security feature is enabled or disabled using the snmpwalk command.
Simple Network Management Protocol (SNMP)
965