Administrator Guide

• For ISIS, you can set the resolution in the range 1 to 1000, where the default is 10.

• For OSPF, you can set the resolution in the range 1 to 1592, where the default is 1.

• The resolution value used to map static routes is not configurable. By default, Dell EMC Networking OS

assigns a metric of 0 to static routes.

• The resolution value used to map RIP routes is not configurable. The RIP hop-count is automatically multiplied

by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which considers the route to be

DOWN.

Commands

• threshold metric – configure the metric threshold used to determine the UP and/or DOWN state of a tracked

route.

• track ipv6 route metric threshold – configure object tracking on the threshold of an IPv6 route metric.

Object Tracking 1075