Administrator Guide

priv (OPTIONAL) Enter the keyword priv to specify both authentication and then
scrambling of the packet.
community-string Enter a text string (up to 20 characters long) as the name of the SNMP community.
NOTE: For version 1 and version 2c security models, this string represents
the name of the SNMP community. The string can be set using this
command; however, Dell EMC Networking OS recommends setting the
community string using the snmp-server community command before
executing this command. For version 3 security model, this string is the
USM user security name.
udp-port port-
number
(OPTIONAL) Enter the keywords udp-port followed by the port number of the remote
host to use. The range is from 0 to 65535. The default is 162.
notification-type (OPTIONAL) Enter one of the following keywords for the type of trap to be sent to the
host:
• bgp — Enable BGP state change traps.
• ecfm — Enable ECFM state change traps.
• entity — Enable entity change traps.
• envmon — Enable SNMP environmental monitor traps.
• eoam — Enable EOAM state change traps
• ets — Enable ets traps
• fips — Enable FIP Snooping state change traps
• lacp — Enable LACP state change traps.
• mac — Enable MAC address notification traps.
• isis — Enable ISIS adjacency change traps.
• pfc — Enable pfc traps.
• snmp — Enable SNMP trap.
• stp — Enable 802.1d state change traps.
• vlt — Enable VLT traps.
• vrrp — Enable VRRP state change traps.
• xstp — Enable 802.1s, 802.1w, and PVST+ state change traps.
The default is all trap types are sent to host.
Defaults As above.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced MAC address notification traps on all the Dell EMC Networking OS platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148 and S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Simple Network Management Protocol (SNMP) and Syslog 1469