Administrator Guide

Example
(Topology)
DellEMC#show system stack-ports topology
Topology: Ring
Interface Connection
---------------------
1/53 6/53
1/54 2/53
2/53 1/54
2/54 3/53
3/53 2/54
3/54 4/53
4/53 3/54
4/54 5/53
5/53 4/54
5/54 6/54
6/53 1/53
6/54 5/54
DellEMC#
Related
Commands
• reset stack-unit – resets the designated stack member.
• show hardware stack-unit – displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
• show system – displays the current status of all stack members or a specific member.
stack-unit priority
Configure the ability of a switch to become the management unit of a stack.
Syntax
stack-unit stack-number priority priority-value
Parameters
stack-number Enter the stack member unit identifier.
priority-value This preference parameter allows you to specify the management priority of one backup
switch over another, with 1 as the lowest priority and 14 being the highest. The switch
with the highest priority value is chosen to become the management unit if the active
management unit fails or on the next reload.
Defaults 1
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Related
Commands
• reload – reboots Dell EMC Networking OS.
1526 Stacking