Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

1561

To remove the proxy, use the no proxy-ip-address command.

Parameters

ipv4-address Enter the IP address of the proxy server in a dotted decimal format (A.B.C.D).

ipv6-address Enter the IPv6 address of the proxy server in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

NOTE: To use the IPv6 address, the Open Automation package should also

support IPv6 communications. For this purpose, SupportAssist requires Dell

EMC Networking Open Automation 9.10(0.0) package or later.

port

port-number

Enter the keyword port then the TCP/IP port number. The port number range is from

1024 to 65534.

username

userid

(OPTIONAL) Enter the keyword username then the user ID used for the proxy server.

password Enter the keyword password then the encryption-type or the user password.

encryption-type

(OPTIONAL) Enter an encryption type for the password you enter.

• 0 directs the system to interpret the password as clear text.

• 7 indicates that the password is encrypted using a DES hashing algorithm.

password

Enter a string up to 32 characters long.

Defaults encryption-type for the password is 0.

Command Modes SUPPORTASSIST SERVER

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.

9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,

Z9500, MXL.

Usage Information The passwords are stored encrypted in the running configuration.

enable

Enable communication with the SupportAssist server.

Syntax