Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

541

542

543

544

545

546

547

548

549

550

disable

Disable the DHCP server.

Syntax

disable

DHCP Server is disabled by default. To enable the system to be a DHCP server, use the no disable command.

Defaults Disabled

Command Modes

CONFIGURATION

DHCP <POOL>

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series and S-Series.

dns-server

Assign a DNS server to clients based on address pool.

Syntax

dns-server address [address2...address8]

Parameters

address

Enter a list of DNS servers that may service clients on the subnet. You may list up to eight

servers, in order of preference.

Defaults None

Command Modes DHCP <POOL>