Administrator Guide
• protocol — Use IPv4 protocol field in hash calculation.
• vlan — Use vlan field in hash calculation.
• L4-source-port — Use IPv4 L4-source-port field in hash calculation.
• L4-dest-port — Use IPv4 L4-dest-port field in hash calculation.
mac [
source-mac
|
source-port-id
|
source-module-id
|
dest-mac
|
dest-
port-id
|
dest-
module-id
|
vlan
|
ethertype
|
source-dest-mac
]
To use MAC key fields in hash computation, enter the keyword mac then one of the
parameters:
• source-mac — Use source-mac field in hash calculation.
• source-port-id — Use src-port-id field in hash calculation.
• source-module-id — Use src-module-id field in hash calculation.
• dest-mac — Use dest-mac field in hash calculation.
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash calculation.
• vlan — Use vlan field in hash calculation .
• ethertype — Use Ethertype field in hash calculation.
• source-dest-mac — Use SMAC and DMAC fields in hash calculation.
tunnel [
ipv4-over-
ipv4
|
ipv4-over-
gre-ipv4
|
mac-in-
mac
]}
To use tunnel key fields in hash computation, enter the keyword tunnel then one of the
parameters:
• ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash calculation.
• ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in hash calculation.
• mac-in-mac — Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Added support for IPv6.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
IPv4 Routing 787