Administrator Guide

Version Description
6.2.1.1 Introduced
clear ip msdp statistic
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries.
Syntax
clear ip msdp statistic peer peer-address
Parameters
peer Enter the keyword peer to clear the MSDP peer entries.
peer-address Enter the IP address of the MSDP peer.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Added the local option.
7.7.1.0 Added the rejected-sa option.
6.2.1.1 Introduced
debug ip msdp
Turn on MSDP debugging.
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging off, use the no debug ip msdp {event peer address | packet peer
address | pim} command.
Parameters
event peer
address
Enter the keyword event then the peer address in a dotted decimal format (A.B.C.D.).
Multicast Source Discovery Protocol (MSDP) 989