Users Guide

Table 1. Dell Networking OS Command Modes (continued)
CLI Command Mode Prompt Access Command
LLDP MANAGEMENT INTERFACE
Dell(conf-lldp-mgmtIf)#
management-interface (LLDP Mode)
LINE Dell(config-line-console) or
Dell(config-line-vty)
line console orline vty
MONITOR SESSION
Dell(conf-mon-sess-sessionID)# monitor session
OPENFLOW INSTANCE
Dell(conf-of-instance-of-id)# openflow of-instance
PORT-CHANNEL FAILOVER-GROUP
Dell(conf-po-failover-grp)# port-channel failover-group
PRIORITY GROUP
Dell(conf-pg)# priority-group
PROTOCOL GVRP
Dell(config-gvrp)# protocol gvrp
QOS POLICY
Dell(conf-qos-policy-out-ets)# qos-policy-output
SUPPORTASSIST
Dell(support-assist)# support-assist
VLT DOMAIN
Dell(conf-vlt-domain)# vlt domain
VRRP
Dell(conf-if-interface-type-
slot/port-vrid-vrrp-group-id)#
vrrp-group
u-Boot
Dell=>
Press any key when the following line
appears on the console during a system
boot: Hit any key to stop
autoboot:
UPLINK STATE GROUP
Dell(conf-uplink-state-group-
groupID)#
uplink-state-group
The following example shows how to change the command mode from CONFIGURATION mode to PROTOCOL SPANNING TREE.
Example of Changing Command Modes
Dell(conf)#protocol spanning-tree 0
Dell(config-span)#
The do Command
You can enter an EXEC mode command from any CONFIGURATION mode (CONFIGURATION, INTERFACE, SPANNING TREE, and so
on.) without having to return to EXEC mode by preceding the EXEC mode command with the do command.
The following example shows the output of the do command.
Dell(conf)#do show system brief
Stack MAC : 34:17:eb:f2:c2:c4
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
------------------------------------------------------------------------
1 Management online S4048-ON S4048-ON 1-0(0-3932) 72
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------
1 1 up AC absent 0
1 2 absent absent 0
34
Configuration Fundamentals