Users Guide

Filtering show Command Outputs
Filter the output of a show command to display specific information by adding | [except | find | grep | no-more | save]
specified_text after the command.
The variable specified_text is the text for which you are filtering and it IS case sensitive unless you use the ignore-case sub-
option.
Starting with Dell Networking OS version 7.8.1.0, the grep command accepts an ignore-case sub-option that forces the search to
case-insensitive. For example, the commands:
• show run | grep Ethernet returns a search result with instances containing a capitalized “Ethernet,” such as interface
TenGigabitEthernet 1/1.
• show run | grep ethernet does not return that search result because it only searches for instances containing a non-
capitalized “ethernet.”
• show run | grep Ethernet ignore-case returns instances containing both “Ethernet” and “ethernet.”
The grep command displays only the lines containing specified text. The following example shows this command used in combination with
the show system brief command.
Example of the grep Keyword
Dell(conf)#do show system brief | grep 0
0 not present
NOTE:
Dell Networking OS accepts a space or no space before and after the pipe. To filter a phrase with spaces,
underscores, or ranges, enclose the phrase with double quotation marks.
The except keyword displays text that does not match the specified text. The following example shows this command used in
combination with the show system brief command.
Example of the except Keyword
Dell#show system brief | except 1
Stack MAC : 4c:76:25:e5:49:40
Reload-Type : normal-reload [Next boot : normal-reload]
The find keyword displays the output of the show command beginning from the first occurrence of specified text. The following
example shows this command used in combination with the show system brief command.
Example of the find Keyword
The display command displays additional configuration information.
The no-more command displays the output all at once rather than one screen at a time. This is similar to the terminal length
command except that the no-more option affects the output of the specified command only.
The save command copies the output to a file for future reference.
NOTE:
You can filter a single command output multiple times. The save option must be the last option entered. For
example: Dell# command | grep regular-expression | except regular-expression | grep other-
regular-expression | find regular-expression | save.
Multiple Users in Configuration Mode
Dell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.
A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP address of
the terminal on which the connection was established. For example:
Configuration Fundamentals
37