Users Guide
MIB Support to Display the Available Memory Size
on Flash
Dell Networking provides more MIB objects to display the available memory size on flash memory. The following table lists the MIB object
that contains the available memory size on flash memory.
Table 86. MIB Objects for Displaying the Available Memory Size on Flash via SNMP
MIB Object OID Description
chStackUnitFlashUsageUtil 1.3.6.1.4.1.6027.3.10.1.2.9.1.6 Contains flash memory usage in percentage.
The chStackUnitUtilTable MIB table contains the chStackUnitFlashUsageUtil MIB object which contains the flash memory usage percent.
The chStackUnitUtilTable is located in f10SSerChassisMib MIB.
Viewing the Available Flash Memory Size
• To view the available flash memory using SNMP, use the following command.
snmpget -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.9.1.6.1
enterprises.6027.3.10.1.2.9.1.5.1 = Gauge32: 24
The output above displays that 24% of the flash memory is used.
MIB Support to Display the Software Core Files
Generated by the System
Dell Networking provides MIB objects to display the software core files generated by the system. The chSysSwCoresTable contains the
list of software core files generated by the system. The following table lists the related MIB objects.
Table 87. MIB Objects for Displaying the Software Core Files Generated by the System
MIB Object OID Description
chSysSwCoresTable 1.3.6.1.4.1.6027.3.10.1.2.10 This is the table that contains the list of
software core files generated by the
system.
chSysCoresEntry 1.3.6.1.4.1.6027.3.10.1.2.10.1 Entry number.
chSysCoresInstance 1.3.6.1.4.1.6027.3.10.1.2.10.1.1 Stores the indexed information about the
available software core files.
chSysCoresFileName 1.3.6.1.4.1.6027.3.10.1.2.10.1.2 Contains the core file names and the file
paths.
chSysCoresTimeCreated 1.3.6.1.4.1.6027.3.10.1.2.10.1.3 Contains the time at which core files are
created.
chSysCoresStackUnitNumber 1.3.6.1.4.1.6027.3.10.1.2.10.1.4 Contains information that includes which
stack unit or processor the core file was
originated from.
chSysCoresProcess 1.3.6.1.4.1.6027.3.10.1.2.10.1.5 Contains information that includes the
process names that generated each core
file.
Viewing the Software Core Files Generated by the System
Simple Network Management Protocol (SNMP)
737