Users Guide

[no] url uniform-resource-locator
Dell(conf-supportassist-serv-default)#url https://192.168.1.1/index.htm
Dell(conf-supportassist-serv-default)#
Viewing SupportAssist Configuration
To view the SupportAssist configurations, use the following commands.
1. Display information on SupportAssist feature status including any activities, status of communication, last time communication sent,
and so on.
EXEC Privilege mode
show support-assist status
Dell#show support-assist status
SupportAssist Service: Installed
EULA: Accepted
Server: default
Enabled: Yes
URL: https://stor.g3.ph.dell.com
Service status: Enabled
Server: chennai
Enabled: Yes
URL: http://10.16.148.19/
Activity State Last Start Last Success
-------------- ------- ------------------------ ------------------------
full-transfer Success Aug 10 2015 11:15:26 PST Aug 10 2015 11:15:28 PST
2. Display the current configuration and changes from the default values.
EXEC Privilege mode
show running-config support-assist
Dell# show running-config support-assist
!
support-assist
!
activity full-transfer
enable
activity-manifest install testing
!
contact-company name My Company
street-address 123 Main Street
address city MyCity country MyCountry
!
contact-person first john last doe
email-address primary [e-mail]
preferred-method email
!
server default
enable
url https://192.168.1.1/index.htm
3. Display the EULA for the feature.
EXEC Privilege mode
show eula-consent {support-assist | other feature}
Dell#show eula-consent
SupportAssist EULA has been: Accepted
Additional information about the SupportAssist EULA is as follows:
By installing SupportAssist, you allow Dell to save your contact information
(e.g. name, phone number and/or email address) which would be used to provide
technical support for your Dell products and services. Dell may use the information
790
SupportAssist