Users Guide

Figure 146. Create Service Node
3. Create VXLAN Gateway
To create a VXLAN L2 Gateway, the IP address of the Gateway is mandatory. The following is the snapshot of the user interface in
creating a VXLAN Gateway
Figure 147. Create Gateway
4. Create Logical Switch
You can create a logical network by creating a logical switch. The logical network acts as the forwarding domain for workloads on the
physical as well as virtual infrastructure.
Figure 148. Create Logical Switch
5. Create Logical Switch Port
A logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway connection to an external network.
It binds the virtual access ports in the GW to logical network (VXLAN) and VLAN.
Figure 149. Create Logical Switch Port
NOTE: For more details about NVP controller configuration, refer to the NVP user guide from VMWare .
Configuring VxLAN Gateway
To configure the VxLAN gateway on the switch, follow these steps:
1. Connecting to NVP controller
2. Advertising VXLAN access ports to controller
Virtual Extensible LAN (VXLAN)
873