API Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4112F-ON/S4112T-ON

1351

trust-map dot1p default

service-policy output type queuing pmap1

ets mode on

qos-map traffic-class tmap2

trust-map dot1p tmap1

priority-flow-control mode on

OS10(conf-if-eth1/1/53)# do show lldp dcbx interface ethernet 1/1/53

E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled

R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled

P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled

F-Application priority for FCOE enabled f-Application Priority for FCOE disabled

I-Application priority for iSCSI enabled i-Application Priority for iSCSI disabled

-----------------------------------------------------------------------------------

Interface ethernet1/1/53

Port Role is Manual

DCBX Operational Status is Enabled

Is Configuration Source? FALSE

Local DCBX Compatibility mode is CEE

Local DCBX Configured mode is CEE

Peer Operating version is CEE

Local DCBX TLVs Transmitted: ErPfi

Local DCBX Status

-----------------

DCBX Operational Version is 0

DCBX Max Version Supported is 0

Sequence Number: 2

Acknowledgment Number: 1

Protocol State: In-Sync

Peer DCBX Status

-----------------

DCBX Operational Version is 0

DCBX Max Version Supported is 0

Sequence Number: 1

Acknowledgment Number: 2

3 Input PFC TLV pkts, 3 Output PFC TLV pkts, 0 Error PFC pkts

3 Input PG TLV Pkts, 3 Output PG TLV Pkts, 0 Error PG TLV Pkts

3 Input Appln Priority TLV pkts, 3 Output Appln Priority TLV pkts,

0 Error Appln Priority TLV Pkts

Total DCBX Frames transmitted 3

Total DCBX Frames received 3

Total DCBX Frame errors 0

Total DCBX Frames unrecognized

OS10(conf-if-eth1/1/53)# dcbx version cee

OS10(conf-if-eth1/1/53)# show configuration

interface ethernet1/1/53

switchport access vlan 1

no shutdown

dcbx version ieee

service-policy input type network-qos test