API Guide
Apply vFabric configuration on the interface that connects to FCoE end points (CNA)
OS10(config)# interface range ethernet 1/1/54,1/1/55
OS10(conf-range-eth1/1/54,1/1/55)# vfabric 100
OS10(conf-range-eth1/1/54,1/1/55)# no shut
OS10(conf-range-eth1/1/54,1/1/55)# exit
Apply vFabric configuration on the FC upstream interfaces
OS10(config)# interface range fibrechannel 1/1/1,1/1/2
OS10(conf-range-fc1/1/1,1/1/2)# vfabric 100
OS10(conf-range-fc1/1/1,1/1/2)# no shut
OS10(conf-range-fc1/1/1,1/1/2)# exit
Apply FCoE delay FCF advertisement configuration globally
OS10(config)# fcoe delay fcf-adv 15
Example: Manual rebalance trigger
This section describes how to use the manual rebalance CLI command to rebalance the load when the system is in an
unbalanced state.
OS10#re-balance npg sessions vfabric 100
Fabric Id 100 state before rebalancing
Uplink   FLOGI        FDISC          Load              Speed         Excess
Intf                                                           (Gbps)         Load
-------------------------------------------------------------------------------------
Fc 1/1/1          1            9              10                8             7
Fc 1/1/2          3            3              6                 16            0
-------------------------------------------------------------------------------------
                  4            12             16                24            7
-------------------------------------------------------------------------------------
Session Re-distributions:
16 Session Re-distribution(s)
-----------------------------------------------------------------------------------------
---
Node WWPN                       From Uplink Intf        To Uplink Intf      No.of 
sessions
-----------------------------------------------------------------------------------------
---
20:01:d4:ae:52:1a:ee:54         Fc 1/1/1                    Fc 1/1/2        10
21:01:d4:ae:52:1a:ee:54         Fc 1/1/2                    Fc 1/1/1        2
22:01:d4:ae:52:1a:ee:54         Fc 1/1/2                    Fc 1/1/1        2
23:01:d4:ae:52:1a:ee:54         Fc 1/1/2                    Fc 1/1/1        2
Fabric Id 100 expected state after rebalancing
Uplink     FLOGI          FDISC        Load           Speed            Excess
Intf                                                           (Gbps)           Load
--------------------------------------------------------------------------------------
Fc 1/1/1            3              3            6              8                1
Fc 1/1/2            1              9            10             16               0
--------------------------------------------------------------------------------------
                    4              12           16             24               1 
--------------------------------------------------------------------------------------
Fibre Channel
369










