API Guide

Usage
Information
The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x max-req 4
Supported
Releases
10.2.0E or later
dot1x port-control
Controls the 802.1X authentication performed on the interface.
Syntax
dot1x port-control {force-authorized | force-unauthorized | auto}
Parameters
● force-authorized — Disables 802.1X authentication on the interface and allows all traffic on the
interface without authentication.
● force-unauthorized — Keeps the port in the unauthorized state, ignoring all attempts by the
client to authenticate.
● auto — Enables 802.1X authentication on the interface.
Default Force-authorized
Command Mode INTERFACE
Usage
Information
The no version of this command resets the value to the default.
Example
OS10(config)# interface range ethernet 1/1/7-1/1/8
OS10(conf-range-eth1/1/7-1/1/8)# dot1x port-control auto
Supported
Releases
10.2.0E or later
dot1x re-authentication
Enables periodic re-authentication of 802.1X supplicants.
Syntax
dot1x re-authentication
Parameters None
Default Disabled
Command Mode INTERFACE
Usage
Information
The no version of this command disables the periodic re-authentication of 8021.X supplicants.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x re-authentication
Supported
Releases
10.2.0E or later
dot1x timeout quiet-period
Sets the number of seconds that the device remains in the quiet state following a failed authentication exchange with a
supplicant.
Syntax
dot1x timeout quiet-period seconds
Parameters quiet period seconds — Enter the number of seconds for the 802.1X quiet period timeout, from 1
to 65535.
Layer 2 407