API Guide

View interface object tracking information
OS10# show track interface
TrackID Resource Parameter Status LastChange
---------------------------------------------------------------------------------
1 line-protocol ethernet1/1/1 DOWN
2017-02-03T08:41:25Z1
OS10# show track ip
TrackID Resource Parameter Status LastChange
---------------------------------------------------------------------------------
2 ipv4-reachablity 1.1.1.1 DOWN
2017-02-03T08:41:43Z1
OS10# show track ipv6
TrackID Resource Parameter Status LastChange
---------------------------------------------------------------------------------
3 ipv6-reachablity 10::10 DOWN 2017-02-03T08:41:55Z1
View IPv4 next-hop object tracking
OS10# show track ip
View IPv6 next-hop object tracking
OS10# show track ipv6
View running configuration
OS10# show running-configuration
OTM commands
delay
Configures the delay timers.
Syntax
delay {up | down} seconds
Parameters seconds — Enter the delay time in seconds. A maximum of 180 characters.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(conf-track-100)# delay up 200 down 100
Supported
Releases
10.3.0E or later
interface line-protocol
Configures an object to track a specific interface's line-protocol status.
Syntax
interface interface line-protocol
Parameters interface — Enter the interface information:
● ethernet — Physical interface.
● port-channel — Enter the port-channel identifier.
● vlan — Enter the VLAN identifier.
● loopback — Enter the Loopback interface identifier.
748 Layer 3