Connectivity Guide

OS10(config)# ip domain-list vrf-vrfblue dns3
OS10(config)# ip domain-list vrf vrf-blue dns4
OS10(config)# ip domain-list vrf vrf-blue dns5
View local system domain name information
OS10# show running-configuration
! Version 10.2.9999E
! Last configuration change at Feb 20 04:50:33 2017
!
username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/
UNwh8WVuxwfd9q4pWIgNs5BKH.
aaa authentication system:local
ip domain-name dell.com
ip domain-list f10.com
ip name-server 1.1.1.1 2::2
ip host dell-f10.com 10.10.10.10
snmp-server community public read-only
snmp-server contact http://www.dell.com/support/
snmp-server location United States
debug radius false
DHCP commands
default-router address
Assigns a default gateway to clients based on the IP address pool.
Syntax
default-router address [address2...address8]
Parameters
• address — Enter an IPv4 or IPv6 address to use as the default gateway for clients on the subnet in A.B.C.D
or A::B format.
• address2...address8 — (Optional) Enter up to eight IP addresses, in order of preference.
Default Not congured
Command Mode DHCP-POOL
Usage Information Congure up to eight IP addresses, in order of preference. Use the no version of this command to remove the
conguration.
Example
OS10(conf-dhcp-20.1.1.1)# default-router 20.1.1.100
Supported Releases 10.2.0E or later
disable
Disables the DHCP server.
Syntax
disable
Parameters None
Default Disabled
Command Mode DHCP
138 System management