Connectivity Guide
• Dene the LLDP-MED network policy in CONFIGURATION mode.
lldp-med network-policy number app {voice | voice-signaling | guest-voice | guestvoice-
signaling | softphone-voice | streaming-video | video-conferencing | video-signaling}{vlan
vlan-id vlan-type {tag | untag} priority priority dscp dscp value}
Congure LLDP-MED network policy for voice applications
OS10(config)# lldp med network-policy 10
OS10(config)# lldp med network-policy 10 app
OS10(config)# lldp med network-policy 10 app voice
OS10(config)# lldp med network-policy 1 app voice vlan 10 vlan-type tag
OS10(config)# lldp med network-policy 1 app voice-signaling vlan 10 vlan-type tag priority 2
dscp 1
Packet timer values
LLDPDUs transmitt periodically. You can congure LLDP packet timer values for LLPDU transmission.
1 Congure the LLDP packet timer value in CONFIGURATION mode.
lldp timer
2 Enter the multiplier value for the hold time in CONFIGURATION mode.
lldp holdtime-multiplier
3 Enter the delay in seconds for LLDP initialization on any interface in CONFIGURATION mode.
lldp reinit
Congure LLDPDU timer
OS10(config)# lldp timer 60
OS10(config)# do show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 2
Transmit interval in seconds: 60
Congure LLDPDU intervals
OS10(config)# lldp holdtime-multiplier 2
OS10(config)# do show lldp timers
LLDP Timers:
Holdtime in seconds: 60
Reinit-time in seconds: 2
Transmit interval in seconds: 30
Disable and re-enable LLDP
By default, LLDP is enabled for each interface and globally. You can disable LLDP on an interface or globally. If you disable LLDP globally,
LLDP is disabled on all interfaces irrespective of whether LLDP is previously enabled or disabled on an interface. When you enable LLDP
globally, the LLDP conguration in interface mode takes precedence over the global LLDP conguration.
1 Disable LLDPDU transmit or receive in INTERFACE mode.
no lldp transmit
no lldp receive
2 Disable LLDP holdtime multiplier value in CONFIGURATION mode.
no lldp holdtime-multiplier
3 Disable LLDP initialization in CONFIGURATION mode.
no lldp reinit
4 Disable LLDP MED in CONFIGURATION or INTERFACE mode.
no lldp med
Layer 2
295