Connectivity Guide
4 Thu Apr 20 19:47:03 UTC 2017 system general info system-version view
5 Thu Apr 20 19:47:16 UTC 2017 admin
6 Thu Apr 20 19:47:16 UTC 2017 terminal length 0
7 Thu Apr 20 19:47:18 UTC 2017 terminal datadump
8 Thu Apr 20 19:47:20 UTC 2017 %abc
9 Thu Apr 20 19:47:22 UTC 2017 switchshow
10 Thu Apr 20 19:47:24 UTC 2017 cmsh
11 Thu Apr 20 19:47:26 UTC 2017 show version
12 Thu Apr 20 19:47:28 UTC 2017 cmsh
13 Thu Apr 20 19:47:30 UTC 2017 show version
14 Thu Apr 20 19:47:32 UTC 2017 show system
15 Fri Apr 21 12:35:31 UTC 2017 BIOS 3.20.0.3
• Enter clear command-history to clear the trace messages in show command-history.
OS10# clear command-history
• Check the show command-history to verify that the trace messages are cleared.
• Enter show system from EXEC mode to view the system status information.
OS10# show system
Node Id : 1
MAC : 34:17:eb:f2:9a:c4
Number of MACs : 256
Up Time : 2 days 05:57:17
-- Unit 1 --
Status : up
System Identifier : 1
Down Reason : unknown
Digital Optical Monitoring : disable
System Location LED : off
Required Type : S4048
Current Type : S4048
Hardware Revision : X01
Software Version : 10.4.3.0
Physical Ports : 48x10GbE, 6x40GbE
BIOS : 3.21.0.4
System CPLD : 15
Master CPLD : 12
Slave CPLD : 5
-- Power Supplies --
PSU-ID Status Type AirFlow Fan Speed(rpm) Status
----------------------------------------------------------------
1 not-present
2 up UNKNOWN NORMAL 1 10704 up
-- Fan Status --
FanTray Status AirFlow Fan Speed(rpm) Status
----------------------------------------------------------------
1 up NORMAL 1 10108 up
2 10069 up
2 up NORMAL 1 9954 up
2 10108 up
3 up NORMAL 1 9867 up
2 9867 up
Candidate conguration
When you enter OS10 conguration commands in Transaction-Based Conguration mode, changes do not take eect immediately and are
stored in the candidate conguration. The conguration changes become active only after you commit the changes using the commit
command. Changes in the candidate conguration are validated and applied to the running conguration.
50
Getting Started