Connectivity Guide

Parameters
ethernet node/
slot/
port[:subport]
Assign the specied interface to a virtual network.
port-channel
number
Assign the specied port channel to a virtual network.
untagged
Assign untagged trac on an interface or port channel to a virtual network.
vlan-tag vlan-
id
Assign tagged trac on the specied VLAN to a virtual network.
Default Not congured
Command mode VIRTUAL-NETWORK
Usage information Use this command to assign trac on the same VLAN or interface to dierent virtual networks. The no version of
this command removes the congured value.
Example
OS10(config)# virtual-network 10000
OS10(config-vn)# member-interface port-channel 10 vlan-tag 200
OS10(config-vn)# member-interface port-channel 20 untagged
Supported releases 10.4.2.0 or later
nve
Enters network virtualization edge (NVE) conguration mode to congure the source VXLAN tunnel endpoint.
Syntax
nve
Parameters None
Default None
Command mode CONFIGURATION
Usage information In NVE mode, congure the source tunnel endpoint for all virtual networks on the switch.
Example
OS10# nve
OS10(config-nve)#
Supported releases 10.4.2.0 or later
remote-vtep
Congures the IP address of a remote tunnel endpoint in a VXLAN network.
Syntax
remote-vtep ip-address
Parameters ip-address — Enter the IP address of a remote virtual tunnel endpoint (VTEP).
Default Not congured
Command mode VIRTUAL-NETWORK VXLAN-VNI
696 VXLAN