Connectivity Guide

Usage information Use this command to display the virtual-network IP address used for routing trac in a virtual network. Trac
counters also display.
Example
show interface virtual-network 102
Virtual-network 102 is up, line protocol is up
Address is 14:18:77:25:6f:84, Current address is 14:18:77:25:6f:84
Interface index is 66
Internet address is 12.12.12.2/24
Mode of IPv4 Address Assignment: MANUAL
Interface IPv6 oper status: Enabled
Link local IPv6 address: fe80::1618:77ff:fe25:6eb9/64
MTU 1532 bytes, IP MTU 1500 bytes
ARP type: ARPA, ARP Timeout: 60
Last clearing of "show interface" counters: 10:24:21
Queuing strategy: fifo
Input statistics:
89 packets, 10056 octets
Output statistics:
207 packets, 7376 octets
Time since last interface status change: 10:23:21
Supported releases 10.4.3.0 or later
show nve remote-vtep
Displays information about remote VXLAN tunnel endpoints.
Syntax
show nve remote-vtep [ip-address | summary | counters]
Parameters
ip-address
Display detailed information about a specied remote VTEP.
summary
Display summary information about remote VTEPs.
counters
Display statistics on remote VTEP trac.
Default Not congured
Command mode EXEC
Usage information Use this command to display the IP address, operational state, and congured VXLANs for each remote VTEP. The
remote MAC learning and unknown unicast drop settings used for each VXLAN ID (VNI) also display.
Example
OS10# show nve remote-vtep summary
Remote-VTEP State
-----------------------
2.2.2.2 up
OS10# show nve remote-vtep
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD - Unknown-
Unicast-Drop
IP Address: 2.2.2.2, State: up, Encap: VxLAN
VNI list: 10000(DP), 200(DP), 300(DP)
Supported releases 10.4.2.0 or later
698 VXLAN