Connectivity Guide
show virtual-network vlan
Displays the VXLAN virtual networks where a VLAN is assigned.
Syntax
show virtual-network vlan vlan-id
Parameters
vlan vlan-id
Enter a VLAN ID, from 1 to 4093.
Default Not congured
Command mode EXEC
Usage information Use this command to verify the VXLAN virtual networks where a VLAN is assigned, including the port members
connected to downstream servers.
Example
OS10# show show virtual-network 100
Vlan Virtual-network Interface
100 1000 ethernet1/1/1,ethernet1/1/2
Supported releases 10.4.2.0 or later
show vlan (virtual network)
Displays the VLANs assigned to virtual networks.
Syntax
show vlan
Parameters None
Default Not congured
Command mode EXEC
Usage information Use this command to display the VLAN port interfaces that transmit VXLAN packets over a virtual network.
Example
OS10# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ – Attached to Virtual Network
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
* 1 up A Eth1/1/1-1/1/48
@ 100 up T Eth1/1/2,Eth1/1/3
A Eth1/1/1
@ 101 up T port-channel5
200 up T Eth1/1/11-1/1/15
Supported releases 10.4.2.0 or later
source-interface loopback
Congures a dedicated Loopback interface as the source VTEP.
Syntax
source-interface loopback number
702 VXLAN