Connectivity Guide

Example
OS10(conf-pmap-que)# bandwidth percent 70
Supported Releases 10.2.0E or later
buer-statistics-tracking
Enables or disables buer statistics tracking feature globally.
Syntax
buffer-statistics-tracking
Parameters None
Default Disabled
Command Mode SYSTEM-QOS
Usage Information The no form of the command disables buer statistics tracking feature globally. After you disable BST, be sure to
clear the counter using the clear qos statistics type buffer-statistics-tracking command.
Example
OS10# configure terminal
OS10(config)# system qos
OS10(config-sys-qos)# buffer-statistics-tracking
Supported Releases 10.4.3.0 or later
class
Creates a QoS class for a type of policy-map.
Syntax
class class—name
Parameters class-name — Enter a name for the class-map. A maximum of 32 characters.
Default Not congured
Command Mode
POLICY-MAP-QUEUEING
POLICY-MAP-QOS
POLICY-MAP-NQOS
POLICY-MAP-CP
POLICY-MAP-APPLICATION
Usage Information If you dene a class-map under a policy-map, the qos, queuing, or control-plane type is the same as the
policy-map. You must create this map in advance. The only exception to this rule is when the policy-map type is
trust, where the class type must be qos.
Example
OS10(conf-pmap-qos)# class c1
Supported Releases 10.2.0E or later
996 Quality of service