Reference Guide

VLAN commands
description (VLAN)
Adds a description to the selected VLAN.
Syntax
description description
Parameters description — Enter a text string to identify the VLAN (up to 80 characters).
Default Not congured
Command Mode INTERFACE-VLAN
Usage Information None
Example
OS10(conf-if-vlan)# description vlan3
Supported Releases 10.2.0E or later
interface vlan
Creates a VLAN interface.
Syntax
interface vlan vlan-id
Parameters vlan-id — Enter the VLAN ID number (1 to 4093).
Default VLAN 1
Command Mode CONFIGURATION
Usage Information FTP, TFTP, MAC ACLs, and SNMP operations are not supported — IP ACLs are supported on VLANs only. The no
version of this command deletes the interface.
Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)#
Supported Releases 10.2.0E or later
show vlan
Displays VLAN congurations.
Syntax
show vlan vlan-id
Parameters vlan-id — (Optional) Enter a VLAN ID number (1 to 4093).
Default Not congured
Command Mode EXEC
Usage Information Use this command to view VLAN conguration information for a specic VLAN ID.
Example
OS10# show vlan
Codes: * - Default VLAN, G-GVRP VLANs, R-Remote Port Mirroring VLANs, P-
Layer 2 243