Reference Guide
no shutdown
admin@OS10:/opt/dell/os10/bin$
User admin logged out at session 16
SSH commands
You can execute commands remotely using an SSH session. This is supported only for show commands.
• Enter the show command along with SSH.
$ ssh admin@ip-address show-command
$ ssh admin@10.11.98.39 "show version"
admin@10.11.98.39's password:
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.
OS Version: 10.3.9999E(X)
Build Version: 10.3.9999E(X.6309)
Build Time: 2017-12-28T18:07:44-0800
System Type: S4048-ON
Architecture: x86_64
Up Time: 1 week 4 days 08:07:44
OS9 environment commands
You can congure commands in an OS9 environment by using the feature config-os9-style command. The current release
supports VLAN tagging and port-channel grouping commands.
• VLAN Interface mode
– tagged
– no tagged
– untagged
– no untagged
• Port-channel Interface mode:
– channel-member
– no channel-member
• Enable the feature to congure commands in an OS9 environment in CONFIGURATION mode.
OS10(config)# feature config-os9-style
OS10(config)# exit
OS10# show running-configuration compressed
interface breakout 1/1/28 map 10g-4x
feature config-os9-style
• Once this feature is enabled, you cannot use the OS10 format of commands in the new session.
OS10(config)# interface vlan 11
OS10(conf-if-vl-11)# tagged ethernet 1/1/15
OS10(conf-if-vl-11)# show configuration
!
interface vlan11
no shutdown
tagged ethernet 1/1/15
Common commands
44
Getting Started