Reference Guide
network
Congures a range of IPv4 or IPv6 addresses in the address pool.
Syntax
network address/mask
Parameters address/mask — Enter a range of IP addresses and subnet mask in A.B.C.D/x or A::B/x format.
Default Not congured
Command Mode DHCP-POOL
Usage Information Use this command to congure a range of IPv4 or IPv6 addresses.
Example
OS10(config-dhcp-Dell)# network 20.1.1.1/24
Supported Releases 10.2.0E or later
pool
Creates an IP address pool name.
Syntax
pool pool-name
Parameters pool-name — Enter the DHCP server pool name.
Default Not congured
Command Mode CONFIGURATION
Usage Information Use this command to create an IP address pool name.
Example
OS10(conf-dhcp)# pool Dell
OS10(conf-dhcp-Dell)#
Supported Releases 10.2.0E or later
show ip dhcp binding
Displays the DHCP binding table with IPv4 addresses.
Syntax
show ip dhcp binding
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the DHCP binding table.
Example
OS10# show ip dhcp binding
IP Address Hardware address Lease expiration Hostname
+-----------------------------------------------------
11.1.1.254 00:00:12:12:12:12 Jan 27 2016 06:23:45
Total Number of Entries in the Table = 1
Supported Releases 10.2.0E or later
System management 441