Reference Guide
Create user role
OS10(config)# username smith password silver403! newuser role sysadmin
View users
OS10(config)# do show users
Index Line User Role Application Idle Location Login-Time Lock
----- ----- ------- -------- ----------- ----- ---------------------- ----
1 ttyS0 admin sysadmin login/clish . - 2016-04-14 02:06:00
RADIUS authentication
To congure a RADIUS server for authentication, enter the server's IP address or host name. You can change the UDP port number on the
server and the key used to authenticate the OS10 switch on the server.
• Congure a RADIUS authentication server in CONFIGURATION mode. By default, a RADIUS server uses UDP port 1812; the switch
uses radius_server as the key to log in to a RADIUS server.
radius-server host {hostname | ip-address} [auth-port port-number | key authentication-key]
Re-enter the radius-server host command multiple times to congure more than one RADIUS server. If you congure multiple
RADIUS servers, OS10 attempts to connect in the order you congured them. An OS10 switch connects with the congured RADIUS
servers one at a time, until a RADIUS server responds with an accept or reject response.
Congure global settings for the timeout and retransmit attempts allowed on RADIUS servers by using the radius-server
retransmit and radius-server timeout commands. By default, OS10 supports three RADIUS authentication attempts and times
out after ve seconds.
• Congure the number of times OS10 retransmits a RADIUS authentication request in CONFIGURATION mode (0 to 100 retries; default
3).
radius-server retransmit retries
• Congure the timeout period used to wait for an authentication response from a RADIUS server in CONFIGURATION mode (0 to 1000
seconds; default 5).
radius-server timeout seconds
Congure RADIUS server
OS10(config)# radius-server host 1.2.4.5
OS10(config)# radius-server retransmit 10
OS10(config)# radius-server timeout 10
View RADIUS server conguration
OS10# show running-configuration
...
radius-server host 1.2.4.5
key mysecret
radius-server retransmit 10
radius-server timeout 10
...
Delete RADIUS server
OS10# no radius server host 1.2.4.5
TACACS+ authentication
Congure a TACACS+ authentication server by entering the server's IP address or host name. You must also enter a text string for the key
used to authenticate the OS10 switch on a TACACS+ host. The TCP port entry is optional.
System management
459