Reference Guide
reload
Reloads the software and reboots the ONIE-enabled device.
Syntax
reload
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use caution while using this command, as it reloads the OS10 image and reboots the device.
Example
OS10# reload
Proceed to reboot the system? [confirm yes/no]:y
Supported Releases 10.2.0E or later
show alias
Displays congured alias commands available in both persistent and non-persistent modes.
Syntax
show alias [brief | detail]
Parameters
• brief — Displays brief information of aliases.
• detail — Displays detailed information of aliases.
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show alias
Name Type
---- ----
govlt Config
goint Config
mTest Config
shconfig Local
showint Local
shver Local
Number of config aliases : 3
Number of local aliases : 3
Example (brief —
displays the rst 10
characters of the
alias value))
OS10# show alias brief
Name Type Value
---- ---- -----
govlt Config "vlt-domain..."
goint Config "interface ..."
mTest Config line 1 "interface ..."
line 2 "no shutdow..."
line 3 "show confi..."
default 1 "ethernet"
default 2 "1/1/1"
shconfig Local "show runni..."
showint Local "show inter..."
56 Getting Started