Reference Guide

Usage Information None
Example
OS10(config)# system qos
OS10(config-sys-qos)#
Supported Releases 10.2.0E or later
trust
Sets the dynamic classication to trust.
Syntax
trust {dot1p | diffserv} [fallback]
Parameters
• diffserv — Set the dynamic classication to trust DSCP.
• dot1p — Set the dynamic classication to trust Dot1p.
• fallback — (Optional) Honor trusting dot1p or DSCP only if other match criteria in this policy map does not
qualies for a packet.
Default Disabled
Command Mode POLICY-MAP-CLASS-MAP
Usage Information The ingress QoS policy type and class-trust support this command.
Example
OS10(conf-pmap-c-qos)# trust dot1p
Supported Releases 10.3.0E or later
trust dot1p-map
Creates user-dened trust map for dot1p ows.
Syntax
trust dot1p-map map-name
Parameters map-name — Enter the name of the dot1p trust map (up to 32 characters).
Default Not congured
Command Mode CONFIGURATION
Usage Information If trust is enabled, trac obeys the dot1p map. default-dot1p-trust is a reserved trust-map name. The no
version of this command returns the value to the default.
Example
OS10(config)# trust dot1p-map map1
OS10(config-tmap-dot1p-map)# qos-group 4 dot1p 5
Supported Releases 10.3.0E or later
trust dscp-map
Creates user-dened trust map for dscp ows.
Syntax
trust dscp-map map-name
Quality of service 597