Users Guide

system-cli disable
Disables the system command.
Syntax
system-cli disable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
The no version of this command enables OS10 system command.
Example
OS10# configure terminal
OS10(config)# system-cli disable
Supported
Releases
10.4.3.0 or later
system-user linuxadmin disable
Disables the linuxadmin account.
Syntax
system-user linuxadmin disable
Parameters None
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The linuxadmin account allows you to access the Linux shell. Use the system-user linuxadmin
disable command to disable Linux shell access. You can still run Linux commands from the OS10
command-line interface using the system command. To disable the system command from executing
Linux commands, use the system-cli disable command.
Example
OS10(config)# system-user linuxadmin disable
Supported
Releases
10.4.3.0 or later
system identifier
Sets a non-default unit ID in a non-stacking configuration.
Syntax
system identifier system-id
Parameters system-id — Enter the system ID, from 1 to 9.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The system ID displays in the stack LED on the switch front panel.
Example
OS10(config)# system identifier 1
Supported
Releases
10.3.0E or later
100 CLI Basics