Users Guide

show ip pim register-filter
Displays the details of the register filter.
Syntax
show ip pim [vrf vrf-name] register-filter group-address source-address
Parameters
● vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
● group-address—Enter the group address to which the multicast traffic is destined.
● source-address—Enter the source address from which the multicast traffic originates.
Default None
Command Mode EXEC
Usage
Information
This command displays access list information that helps to determine whether the (S, G) pair is included
or excluded for the register filter.
Example
OS10# show ip pim register-filter 225.1.1.1 10.10.10.2
PIM Filters
Access List : acl-register-filter
VRF : default
Group Address : 225.1.1.1 Source Address : 10.10.10.2 Criteria : Deny
Supported
Releases
10.5.2.0 or later
show ip pim rp
Displays brief information about all multicast group to RP mappings.
Syntax
show ip pim [vrf vrf-name] rp [mapping | group-address]
Parameters
● vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
● mapping—Enter the keyword mapping to display the multicast groups to RP mapping and
information about how RP is learned.
● group-address—Enter the multicast group address mask in dotted-decimal format to view the RP
for a specific group (A.B.C.D).
Default None
Command Mode EXEC
Usage
Information
None
Examples
OS10# show ip pim rp
Group RP
---------------------------------
225.1.1.1 171.1.1.1
225.1.1.2 171.1.1.1
225.1.1.3 171.1.1.1
225.1.1.4 171.1.1.1
225.1.1.5 171.1.1.1
225.1.1.6 171.1.1.1
225.1.1.7 171.1.1.1
225.1.1.8 171.1.1.1
225.1.1.9 171.1.1.1
225.1.1.10 171.1.1.1
225.1.1.11 171.1.1.1
225.1.1.12 171.1.1.1
225.1.1.13 171.1.1.1
OS10# show ip pim rp mapping
PIM Group-to-RP Mappings
1078 Multicast