Users Guide
1 RPs
2 sources
Message summary:
150/50 Joins/Prunes sent/received
0/0 Candidate-RP advertisements sent/received
6/4 BSR messages sent/received
0 Null Register messages received
0/50 Register-stop messages sent/received
Data path event summary:
100 no-cache messages received
50 last-hop switchover messages received
0/0 pim-assert messages sent/received
0/0 register messages sent/received
VLT Multicast summary:
0(*,G) synced entries in MFC
281(S,G) synced entries in MFC
0(S,G,Rpt) synced entries in MFC
Supported
Releases
10.4.3.0 or later
show ip pim tib
Displays the PIM tree information base (TIB).
Syntax
show ip pim [vrf vrf-name] tib [group-address [source-address]]
Parameters
● vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
● group-address—Enter the group address in dotted-decimal format (A.B.C.D).
● source-address—Enter the source address in dotted-decimal format (A.B.C.D).
Default None
Command Mode EXEC
Usage
Information
This command displays the following:
● S, G—Displays the entry in the multicast PIM database
● uptime—Displays the amount of time the entry has been in the PIM route table
● expires—Displays the amount of time until the entry expires and is removed from the database
● RP—Displays the IP address of the RP or source for the entry
● Incoming interface—Displays the reverse path forwarding (RPF) interface towards the RP/
source
● RPF neighbor—Displays the next hop IP address from this interface towards the RP/source
● Outgoing interface list—Lists the interfaces that meet one of the following criteria:
○ a directly connected member of the group
○ a statically connected member of the group
○ received an (*, G) or (S, G) join message
Example
OS10# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 13:08:24, expires 00:00:12, RP 171.1.1.1, flags:
SCJ
Incoming interface: vlan105, RPF neighbor 3.1.1.1
Outgoing interface list:
1080 Multicast