Users Guide

Default None
Command Mode EXEC
Usage
Information
None
Examples
OS10# show ztd-status
-----------------------------------
ZTD Status : disabled
ZTD State : completed
Protocol State : idle
Reason : ZTD process completed successfully at Mon Jul 16
19:31:57 2018
-----------------------------------
OS10# show ztd-status
-----------------------------------
ZTD Status : disabled
ZTD State : failed
Protocol State : idle
Reason : ZTD process failed to download post script file
-----------------------------------
● ZTD Status — Current operational status: enabled or disabled.
● ZTD State — Current ZTD state: initialized, in-progress, successfully completed, failed, or canceled
while in progress.
● Protocol State — Current state of ZTD protocol: initialized, idle while waiting to enable or
complete ZTD process, waiting for DHCP post-hook callback, downloading files, installing image,
executing pre-config or post-config CLI commands, or executing post-ZTD script file.
● Reason — Description of a successful or failed ZTD process.
Supported
Releases
10.4.1.0 or later
ztd cancel
Stops ZTD while in progress.
Syntax
ztd cancel
Parameters None
Default ZTD is enabled.
Command Mode EXEC
Usage
Information
After you cancel ZTD, you can enter CLI commands to configure the switch.
The system cancels the ZTD process when you enter CLI Configuration mode. You can enter this
command only when ZTD is in a waiting state; that is, before it receives an answer from the DHCP server.
Otherwise, the command returns an error message. The ztd stop and ztd cancel commands
perform the same function.
Example
OS10# ztd cancel
Supported
Releases
10.4.1.0 or later
Dell EMC SmartFabric OS10 zero-touch deployment 121