Users Guide

Example
OS10(config)# ip ssh server password-authentication
Supported
Releases
10.3.0E or later
ip ssh server port
Configures the SSH server listening port.
Syntax
ip ssh server port port-number
Parameters port-number — Enter the listening port number, from 1 to 65535.
Default 22
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the configuration.
Example
OS10(config)# ip ssh server port 255
Supported
Releases
10.3.0E or later
ip ssh server pubkey-authentication
Enables public key authentication for the SSH server.
Syntax
ip ssh server pubkey-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
The no version of this command disables the public key authentication.
Example
OS10(config)# ip ssh server pubkey-authentication
Supported
Releases
10.3.0E or later
ip ssh server vrf
Configures an SSH server for the management or non-default VRF instance.
Syntax
ip ssh server vrf {management | vrf-name}
Parameters
● management — Configures the management VRF instance to reach the SSH server.
● vrf-name — Enter the VRF instance used to reach the SSH server.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The SSH server uses the management VRF.
Example
OS10(config)# ip ssh server vrf management
OS10(config)# ip ssh server vrf vrf-blue
Security 1369