Users Guide

Source: /psu/1
Name: EQM_MORE_PSU_FAULT
Description: psu 2 is not working correctly
Raise-time: Sun 10-07-2018 18:39:47
Ack-time: Sun 10-07-2018 20:39:47
New: true
State: acknowledged
-------------------------------------------
Supported
Releases
10.4.3 or later
show alarms summary
Displays the summary of all active alarms.
Syntax
show alarms summary
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show alarms summary
Active-alarm Summary
-------------------------------------------
Total-count: 2
Critical-count: 0
Major-count: 1
Minor-count: 1
Warning-count: 0
-------------------------------------------
Supported
Releases
10.2.0E or later
show event history
Displays the history of all events with the latest at the top of the output.
Syntax
show event history [summary] [reverse] [severity severity-name] [details]
[sequence sequence-number]
Parameters
● summary—Displays a summary of the event history.
● reverse—Displays a summary of the event history from the beginning, with the oldest event listed
at the top of the output.
● severity—Displays event history for a given severity: CRITICAL, MAJOR, MINOR, WARNING,
INFORMATIONAL.
● details—Displays event history in details.
● sequence sequence-number—Displays event details for a given sequence number.
Default None
Command Mode EXEC
Usage
Information
Displays event logs in the OS10 switch.
Example
OS10# show event history
Sq No State Name Timestamp Source
----- -------- ------------------ ----------------------- ------
1814 Troubleshoot Dell EMC SmartFabric OS10