Users Guide

----------------------------------------------------------------------------
* 1 64::100, 64.6.7.88
2 100::100, 100.101.102.100
VLAN: 3000
VLT Unit ID Anycast-IPs
----------------------------------------------------------------------------
* 1 100.101.102.100
2 Not configured
VLAN: 4000
VLT Unit ID Anycast-IPs
----------------------------------------------------------------------------
* 1 Not configured
2 8.7.6.5
Example
(mismatch dhcp-
relay)
OS10# show vlt 1 mismatch dhcp-relay
DHCP Relay Mismatch:
Global Relay Configuration Mismatch
-----------------------------------
VRF Relay Configuration Mismatch
--------------------------------
Interface Relay Configuration Mismatch
--------------------------------------
Interface: vlan3128
VLT Unit ID Option-82 Server-Override VSS Source-Interface
------------------------------------------------------------------------
* 1 Disabled - - -
2 Enabled - - -
Example
(mismatch
private-vlan
mapping)
OS10# show vlt 1 mismatch private-vlan mapping
Private VLAN mapping mismatch:
No mismatch
Example
(mismatch
private-vlan
port-mode)
OS10# show vlt 1 mismatch private-vlan port-mode
Private VLAN port mode mismatch:
No mismatch
Example
(mismatch
private-vlan vlan-
mode)
OS10# show vlt 1 mismatch private-vlan vlan-mode
Private VLAN mode mismatch:
No mismatch
Supported
Releases
10.2.0E or later
DHCP server commands
default-router address
Assigns a default gateway to clients based on the IP address pool.
Syntax
default-router address [address2...address8]
Parameters
● address — Enter an IPv4 or IPv6 address to use as the default gateway for clients on the subnet in
A.B.C.D or A:B format.
334 System management