Users Guide
Low Latency Modes CLI commands
show switching-mode
Displays the current configured switching-mode.
Syntax
show switching-mode
Parameters None
Defaults Not applicable
Command Mode EXEC
Usage
Information
None
Example
OS10(config)# switching-mode cut-through
OS10(config)# exit
OS10# show switching-mode
Current switching mode: cut-through
OS10# configure terminal
OS10(config)# no switching-mode
OS10(config)# exit
OS10# show switching-mode
Current switching mode: store-and-forward
OS10#
Supported
Releases
10.5.2.0 or later
switching-mode cut-through
Enables the Cut-Through (CT) Switching mode.
Syntax
switching-mode cut-through
Parameters None
Defaults Store and Forward (SF) switching mode
Command Mode CONFIGURATION
Usage
Information
● Use this command to change the default switching-mode to CT Switching mode.
● As part of the show configuration command, nondefault configurations display.
● The No form of this command resets the configuration to the default SF mode.
Example
OS10(config)# switching-mode cut-through
OS10(config)# exit
OS10# show switching-mode
Current switching mode: cut-through
OS10# configure terminal
OS10(config)# no switching-mode
OS10(config)# exit
OS10# show switching-mode
Current switching mode: store-and-forward
OS10#
Supported
Releases
10.5.2.0 or later
352 System management