Users Guide

● To view the established shortest routes between the server and the target ports in switch-2, run the show fc fspf
route command.
OS10#show fc fspf route
vfabric-Id Dest-Domain Route-Cost Next-hop
--------------------------------------------------------------
1 0x65(101) 125 fc1/1/2
● To view the FSPF neighbor information in switch-1, use the show fc fspf neighbor command.
OS10#show fc fspf neighbor
Vfabric-Id Interface Neighbor-DomainID State Dead-Time
--------------------------------------------------------------
1 fc1/1/2 0x77(119) Full 00:00:39
Multiswitch fabric (E Port) CLI commands
show fc fspf interface
Displays the FSPF interface information.
Syntax
show fc fspf interface [fibrechannel node/slot/port[:subport]]
Parameters
node/slot/port[:subport]—Enter the interface information.
Defaults Not applicable
Command Mode GLOBAL CONFIGURATION
Usage
Information
Use this command to display the FSPF information of an interface.
Example
OS10#show fc fspf interface fc 1/1/1
FSPF interface fc1/1/1 in vfabric-id 100
Interface cost is 125
Timer intervals, Hello 20s, Dead 80s, Retransmit 5s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface Index is 0x8080E06
Statistics counters:
Number of packets received: LSU 8 LSA 8 Hello 118 Error packets 0
Number of packets transmitted : LSU 8 LSA 8 Hello 119 Retransmitted LSU 0
Supported
Releases
10.5.1.0 or later
clear fc fabric statistics
Clears the fabric statistics for all the interfaces.
Syntax
clear fc fabric statistics [interface type node/slot/port[:subport] |
vfabric vfabric-id]
Parameters
● node/slot/port[:subport]—Enter interface information.
● vfabric-id—Enter the vfabric ID.
Defaults Not applicable
Command Mode GLOBAL CONFIGURATION
Usage
Information
Use this command to clear the fabric statistics of either a specific or all the fibre channel interfaces, and a
vfabric .
Example
OS10# clear fc fabric statistics interface fc 1/11
Fibre Channel 447