Users Guide

○ image://filename—Enter the path to use to install the image from a local file system.
○ usb://filepath—Enter the path to use to install the image from the USB file system.
Default All
Command Mode EXEC
Usage
Information
Use the show image status command to view the installation progress.
Example
OS10# image install ftp://10.206.28.174:/PKGS_OS10-Enterprise-10.4.0E.55-
installer-x86_64.bin
Supported
Releases
10.2.0E or later
reload onie
Uninstalls existing operating system and reloads to ONIE.
Syntax
reload onie {install | uninstall}
Parameters
● install—Reboots to ONIE in Install Mode.
● uninstall—Reboots to ONIE in Uninstall Mode.
Default Not configured
Command Mode EXEC
Usage
Information
CAUTION: Be careful while using this command as it uninstalls the existing OS10 image and
removes its license.
Security and
Access
Sysadmin and secadmin
Example
OS10-1# reload onie install
Warning: The System will boot in ONIE Install mode. Another OS will be
installed.
Warning: OS10 will be uninstalled, License will be removed and system
will boot in ONIE mode. Proceed to reboot the system? [confirm yes/no]:
OS10-1# reload onie uninstall
Warning: The System will boot in ONIE Uninstall mode.
Warning: OS10 will be uninstalled, License will be removed and system
will boot in ONIE mode. Proceed to reboot the system? [confirm yes/no]:
Supported
Releases
10.5.2.1 or later
show boot
Displays boot-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not configured
Command Mode EXEC
Usage
Information
Use the boot system command to set the boot image for the next reboot.
48 Getting Started with Dell EMC SmartFabric OS10