Users Guide

Use case 2 - NPG fabric is connected to multiple upstream
switches belonging to the same SAN fabric
In this topology, the NPG device is connected to multiple FCF switches and all those FCF switches are part of same SAN fabric.
Configurations in NPG device remains same as in Use case 1.
Configuration in upstream devices remains same as well and it needs to be done in both the switches in the SAN fabric.
Use case 3 - Multiple NPG Fabrics connected to upstream switches
belonging to different SAN fabrics
In this topology the NPG device will have multiple fabrics configured and each fabric connected to upstream switch in different
SAN fabrics.
For this topology, the configurations mentioned for NPG fabric in topology 1 has to be extended to multiple fabric in NPG
device.
Configurations in upstream switches(Multi-switch) remains same.
F_Port commands
The following commands are supported on F_Port mode:
fc alias
Creates an FC alias. After creating the alias, add members to the FC alias. An FC alias can have a maximum of 255 unique
members.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command deletes the FC alias. To delete an FC alias, first remove it from the FC
zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported
Releases
10.3.1E or later
fc zone
Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 255 unique members.
Syntax
fc zone zone-name
Parameters zone-name — Enter a name for the zone.
Defaults Not configured
Command Mode CONFIGURATION
490 Fibre Channel