Users Guide

Supported
Releases
10.5.0 or later
show image status
Displays image transfer and installation information.
Syntax
show image status
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
On older versions of OS10, the image install command may appear frozen and does not display the
current image status. Duplicate the SSH or Telnet session and re-enter the show image status
command to view the current status.
Example
OS10# show image status
Image Upgrade State: install
==================================================
File Transfer State: idle
--------------------------------------------------
State Detail: Completed: No error
Task Start: 2019-01-03T17:37:49Z
Task End: 2019-01-03T17:38:04Z
Transfer Progress: 100 %
Transfer Bytes: 489894821 bytes
File Size: 489894821 bytes
Transfer Rate: 31657 kbps
Installation State: install
--------------------------------------------------
State Detail: In progress: Installing
Task Start: 2019-01-03T17:38:04Z
Task End: 0000-00-00T00:00:00Z
Supported
Releases
10.2.0E or later
show version
Displays software version information.
Syntax
show version
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2020 by Dell Inc. All Rights Reserved.
OS Version: 10.5.2.2
Build Version: 10.5.2.2.215
Build Time: 2020-12-11T21:35:41+0000
System Type: S5248F-ON
Architecture: x86_64
Up Time: 1 day 00:54:13
50 Getting Started with Dell EMC SmartFabric OS10