Users Guide

Fc 1/1/11 01:00:0B 8 8 3 3 6 10
Fc 1/1/12 01:00:0C 8 16 1 0 1 1
VFabric Id : 300
Uplink Speed
Intf FC Id BB Credit (Gbps) FLOGI FDISC Total Re-
distributed
---------------------------------------------------------------------------
-------
Fc 1/1/13 01:00:03 8 8 3 3 6 0
Fc 1/1/14 01:00:04 8 16 1 6 7 5
OS10#show npg uplink-interfaces fcf-info
VFabric Id : 200
FAD Timeout Left : 10 second(s)
FCF Availability Status : No
Uplink Duplicate
Intf Upstream Fabric-Name Error Reason FC-Id(s)
-----------------------------------------------------------------
Fc 1/1/11 10:01:d4:ae:52:1a:ee:50 FLOGI_REJECTED 1
Fc 1/1/12 10:01:d4:ae:52:2b:ff:52 NONE 0
VFabric Id : 300
FAD Timeout Left : 0 second(s)
FCF Availability Status : Yes
Uplink Duplicate
Intf Upstream Fabric-Name Error Reason FC-Id(s)
-----------------------------------------------------------------
Fc 1/1/13 20:01:d4:ae:52:1a:ee:53 NONE 1
Fc 1/1/14 20:01:d4:ae:52:7d:aa:54 NONE 0
OS10#show npg uplink-interfaces vfabric 200 fcf-info
VFabric Id : 200
FAD Timeout Left : 10 second(s)
FCF Availability Status : No
Uplink Duplicate
Intf Upstream Fabric-Name Error Reason FC-Id(s)
-----------------------------------------------------------------
Fc 1/1/11 10:01:d4:ae:52:1a:ee:50 FLOGI_REJECTED 1
Fc 1/1/12 10:01:d4:ae:52:2b:ff:52 NONE 0
Supported
Releases
10.5.2.0 or later
Debug FC commands
The following commands are supported on all the modes: F_Port, NPG, FSB, and Multiswitch.
debug fc
Enables and disables the debug options for the FC module.
Syntax
debug fc {all | error| info | acl | port | tx | pse | ns | fspf | rx-{all |
disc | virt-inst | virt-mnt | vlan-disc | ns | pse | fspf | sw-rscn}
[interface {fibrechannel | ethernet} node | slot | portid]}
Parameters
● all—Enables debug messages for all FC debug log-levels.
● error—Enables error debug log messages.
● info—Enables information log messages.
● acl—Enables debug messages that relate to the Access Control List (ACL).
Fibre Channel 521