Users Guide

Total Med Frames Out : 0
Total Med Frames In : 0
Total Med Frames Discarded : 0
Total Med TLVS Discarded : 0
Total Med Capability TLVS Discarded: 0
Total Med Policy TLVS Discarded : 0
Total Med Inventory TLVS Discarded : 0
View LLDP neighbor advertisements
● View brief information about the LLDP neighbors learned by the OS10 switch.
show lldp neighbors
View LLDP neighbors
OS10# show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
----------------------------------------------------------------------
ethernet1/1/2 Not Advertised fortyGigE 0/56 00:01:e8:8a:fd:35
ethernet1/1/20:1 Not Advertised GigabitEthernet 1/0 00:01:e8:05:db:05
● View LLDP neighbor information for a specific interface.
show lldp neighbors interface ethernetnode/slot/port[:subport]
View LLDP neighbors interface
OS10# show lldp neighbors interface ethernet 1/1/1
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-----------------------------------------------------------------------
ethernet1/1/1 OS10 ethernet1/1/2 4:17:eb:f7:06:c4
● View the detailed LLDP neighbor information for a specific interface.
show lldp neighbors detail
View LLDP neighbors detail
OS10# show lldp neighbors interface ethernet 1/1/1 detail
Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:13:21:57:ca:40
Remote Port Subtype: Interface name (5)
Remote Port ID: ethernet1/1/10
Remote Port Description: Ethernet port 1
Local Port ID: ethernet1/1/1
Locally assigned remote Neighbor Index: 3
Remote TTL: 120
Information valid for next 105 seconds
Time since last information change of this neighbor: 00:00:15
Remote System Name: LLDP-pkt-gen
Remote Management Address (IPv4): 10.1.1.1
Remote System Desc: LLDP packet generator using scapy
Existing System Capabilities: Repeater, Bridge, Router
Enabled System Capabilities: Repeater, Bridge, Router
Remote Max Frame Size: 0
Remote Aggregation Status: false
MAC PHY Configuration:
Auto-neg supported: 1
Auto-neg enabled: 1
Auto-neg advertised capabilities:
10BASE-T half duplex mode,
10BASE-T full duplex mode,
100BASE-TX half duplex mode,
100BASE-TX full duplex mode
MED Capabilities:
Supported:
Layer 2
573