Users Guide
Usage
Information
Enter the ip vrf management command only in non-transaction-based configuration mode. Do not
use transaction-based mode. The no version of this command removes the management VRF instance
configuration.
Example
OS10(config)# ip vrf management
OS10(conf-vrf)#
Supported
Releases
10.4.0E(R1) or later
match source-protocol
Matches the source routing protocol in a route map.
Syntax
match source-protocol {bgp {ebgp | evpn | ibgp} | connected | ospf |
static}
Parameters
● bgp {ebgp | evpn | ibgp}—Enter the BGP variant.
○ ebgp—Filters external BGP routes.
○ evpn—Filters EVPN BGP routes.
○ ebgp—Filters internal BGP routes.
● connected—Filters the connected routes.
● ospf—Filters OSPF routes.
● static—Filters static routes.
Default None
Command Mode ROUTE-MAP
Usage
Information
Use this command to export only a set of routes from a specific routing protocol.
The no version of this command deletes a match.
Example
Route Map Configuration for BGP routes
OS10(config)# route-map match_protocol_bgp_all
OS10(config-route-map)# match source-protocol bgp evpn
OS10(config-route-map)# match source-protocol bgp ibgp
OS10(config-route-map)# match source-protocol bgp ebgp
Route Map Configuration for static routes
OS10(config)# route-map match_static_routes
OS10(config-route-map)# match source-protocol static
Route Map Configuration for connected routes
OS10(config)# route-map match_connected_routes
OS10(config-route-map)# match source-protocol connected
Route Map Configuration for OSPF routes
OS10(config)# route-map match_ospf_routes
OS10(config-route-map)# match source-protocol ospf
Supported
Releases
10.5.2.0 or later
Layer 3 759