Users Guide

license
Installs a license file from a local or remote location.
Syntax
license install [ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:]
filepath
Parameters
● ftp:—(Optional) Install from the remote file system (ftp://userid:passwd@hostip/
filepath)
● http:—(Optional) Install from the remote file system (http://hostip/filepath)
● http:—(Optional) Request from remote server (http://hostip)
● localfs:—(Optional) Install from the local file system (localfs://filepath)
● scp:—(Optional) Request from the remote file system (scp://userid:passwd@hostip/
filepath)
● sftp:—(Optional) Request from the remote file system (sftp://userid:passwd@hostip/
filepath)
● tftp:—(Optional) Request from the remote file system (tftp://hostip/filepath)
● usb:—(Optional) Request from the USB file system (usb://filepath)
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to install the license file. For more information, see Install OS10 license. OS10 requires
a perpetual license to run beyond the 120-day trial period. The license file is installed in the /mnt/license
directory.
Example
OS10# license install scp://user:userpwd/10.1.1.10/CFNNX42-NOSEnterprise-
License.lic
License installation success.
Supported
Releases
10.3.0E or later
lock
Locks the candidate configuration and prevents any configuration changes on any other CLI sessions, either in Transaction or
Non-Transaction-Based Configuration mode.
Syntax
lock
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The lock command fails if there are uncommitted changes in the candidate configuration.
Example
OS10# lock
Supported
Releases
10.2.0E or later
management route
Configures an IPv4/IPv6 static route the Management port uses. To configure multiple management routes, repeat the
command.
Syntax
management route {ipv4-address/mask | ipv6-address/prefix-length}
{forwarding-router-address | managementethernet}
82 CLI Basics