Users Guide
● Administratively shut — Displays the status of the peer group if you do not enable the peer
group. If you enable the peer group, this line does not display.
● BGP version — Displays the BGP version supported.
● Description — Displays the descriptive name that is configured for the BGP peer template. This
field is displayed only when the description is configured.
● For address family — Displays IPv4 unicast as the address family.
● BGP neighbor — Displays the name of the BGP neighbor.
● Number of peers—Displays the number of peers that are configured for this peer group.
● Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is
outbound optimized, an * displays next to the IP address.
Example
MAA-S4048T-X01-7445(config)# do show ip bgp peer-group
Peer-group abc, remote AS 0
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is abc, peer-group internal
Soft-reconfiguration inbound configured
Update packing has 4_OCTET_AS support enabled
Next hop set to self
Max prefix set to 20 with threshold 10 warning only
For address family: IPv6 Unicast
BGP neighbor is abc, peer-group internal
Soft-reconfiguration inbound configured
Update packing has 4_OCTET_AS support enabled
Next hop set to self
Max prefix set to 20 with threshold 10 warning
Number of peers in this group 0
Peer-group members:
Example
(Summary)
OS10# show ip bgp peer-group ebgp summary
BGP router identifier 32.1.1.1 local AS number 6
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
17.1.1.2 7 7 6 00:01:54 5
OS10# show ip bgp peer-group bg1
Peer-group bg1, remote AS 0
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: Unicast
BGP neighbor is bg1, peer-group external
Update packing has 4_OCTET_AS support enabled
Number of peers in this group 2
Peer-group members:
40.1.1.2
876 Layer 3