Users Guide

show vlt mismatch
Displays the RA guard configuration mismatch between VLT peers.
Syntax
show vlt domain-id mismatch [ra-guard]
Parameters domain-id—Enter the VLT domain ID.
Command Mode EXEC
Usage
Information
None
Example
OS10# show vlt 100 mismatch ra-guard
RA Guard Mismatch:
Global RA Guard Configuration Mismatch: No
Interface Vlan Reason
---------------------------------------------------------------------
port-channel100 - Device Role
Supported
Releases
10.5.2.0 or later
IPv6 commands
clear ipv6 neighbors
Deletes all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are not removed.
Syntax
clear ipv6 neighbors [vrf vrf-name] [ipv6-address | interface | virtual-
network vn-id | all]
Parameters
● vrf vrf-name — (Optional) Enter vrf then the name of the VRF to clear the neighbor
corresponding to that VRF. If you do not specify this option, the neighbors in the default VRF clear.
● ipv6-address — Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a
specific IPv6 neighbor. The :: notation specifies successive hexadecimal fields of zero.
● interface interface — To remove all neighbor entries learned on a specific interface, enter the
keyword interface then the interface type and slot/port or number information of the interface:
○ For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/port/subport[/
subport] information.
○ For a 40-Gigabit Ethernet interface, enter fortyGigE then the slot/port information.
○ For a port channel interface, enter port-channel then a number.
○ For a VLAN interface, enter vlan then a number from 1 to 4093.
○ virtual-network vn-id — For a virtual network, enter virtual-network then the ID of
the network.
Defaults None.
Command Mode EXEC
Usage
Information
The no version of this command resets the value to the default.
Example
Supported
Releases
10.4.1.0 or later or later
914 Layer 3